稀土元素对钯室温电学性能的影响

研究了稀浓度(0.6at％以下)稀土元素(La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Er、Yb)对钯的室温电学性能的影响。所有稀土元素均提高钯的电阻率(p)、降低电阻温度系数(α),实验结果与理论分析证明(p·α)_((?)d-RE)d=(p·α)_(Pd)。Gd以前的稀土元素降低钯的对铜热电势(ε),其余重稀土元素增大钯的对铜热电势。按0.1at％RE归一化处理的实验数据表明,轻稀土元素对钯电阻率的影响稍大于重稀土,但Ce、Eu、Yb呈反常影响,化合价和尺寸因素是影响电学性能的主要因素。     

氮气氛下直拉硅中氮含量的红外光谱测定

提出了利用直拉硅中与氮有关的特征红外吸收峰９６３、９９６、１０８１－１及１０２７ｃｍ－１确定直拉硅中氮含量的计算公式，并进行了多种样品实测。该法克服了只用９６３ｃｍ－１峰测定直拉硅中氮使结果偏低的弊病，方法相对偏差为５％～２０％     

Structural Basis for The Recognition of Deaminated Nucleobases by An Archaeal DNA Polymerase

With increasing temperature, nucleobases in DNA become increasingly damaged by hydrolysis of exocyclic amines. The most prominent damage includes the conversion of cytosine to uracil and adenine to hypoxanthine. These damages are mutagenic and put the integrity of the genome at risk if not repaired appropriately. Several archaea live at elevated temperatures and thus, are exposed to a higher risk of deamination. Earlier studies have shown that DNA polymerases of archaea have the property of sensing deaminated nucleobases in the DNA template and thereby stalling the DNA synthesis during DNA replication providing another layer of DNA damage recognition and repair. However, the structural basis of uracil and hypoxanthine sensing by archaeal B-family DNA polymerases is sparse. Here we report on three new crystal structures of the archaeal B-family DNA polymerase from Thermococcus kodakarensis (KOD) DNA polymerase in complex with primer and template strands that have extended single stranded DNA template 5’-overhangs. These overhangs contain either the canonical nucleobases as well as uracil or hypoxanthine, respectively, and provide unprecedented structural insights into their recognition by archaeal B-family DNA polymerases.     

Catalytic ozonation of NH4+-N in wastewater over composite metal oxide catalyst

Large amounts of water containing-ammonium nitrogen(NH₄⁺-N)have attracted increasing attention.Catalytic ozonation technology,involving the generation of hydroxyl radical(OH)with strong oxidation ability,was originally utilized to degrade organic-containing wastewater.In this paper,Ce/MnOx composite metal oxide catalysts prepared with different preparation conditions were used to degrade wastewater containing inorganic pollutant(NH₄⁺-N).The as-prepared catalyst features were characterized using X-ray diffraction(XRD),Brunauer-Emmett-Teller method(BET),scanning electron microscopy(SEM),energy dispersive X-ray spectroscopy(EDS),Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS)and H₂-temperature programmed reduction(H₂-TPR)techniques.The results show that the catalyst,prepared by conditions with precipitant Na₂CO₃ and Ce/Mn molar ratio 1:2 calcined at 400℃for 3 h in pH 11.0,displays the optimal performance,with the removal rate of NH₄⁺-N and selectivity to gaseous nitrogen,88.14 wt%and 53.67 wt%,respectively.The effects of several operating factors including solution pH,initial NH₄⁺-N concentrations and scavengers were evaluated.In addition,XRD patterns of catalyst with the best performance and the comparative study on decontamination of NH₄⁺-N by various processes(O₃,catalyst and catalyst/O₃)show that the primary metal oxides are CeO₂ and MnO₂ in Ce/MnOx composite metal oxide catalysts,which have a synergistic effect on the catalytic ozonation of NH₄⁺-N,and the new phase MnO₂ plays a great role.After 5 consecutive use cycles,the degradation efficiency is declined slightly,and can still achieve better than 70 wt%over 1 h reaction.Additionally,the application of catalytic ozonation for actual wastewater on the removal rate of NH₄⁺-N was investigated.Possible mechanism and degradation pathway of NH₄⁺-N were also proposed.In a word,the application of CeO₂-MnO₂ composite metal oxide catalysts in catalytic ozonation can be regarded as an effective,feasible and promising method for the treatment of NH₄⁺-N.     

Effects of can parameters on canned—forging process of TiAl base alloy（Ⅱ）——Mechanical behavior

1　ＩＮＴＲＯＤＵＣＴＩＯＮＴｉＡｌａｌｌｏｙｈａｓｌｏｎｇｂｅｅｎｃｏｎｓｉｄｅｒｅｄａｓａｐｒｏｍｉｓ ｉｎｇｍａｔｅｒｉａｌｆｏｒｈｉｇｈｔｅｍｐｅｒａｔｕｒｅａｐｐｌｉｃａｔｉｏｎ ,ｄｕｅｔｏｉｔｓｅｘｃｅｌｌｅｎｔｈｉｇｈｔｅｍｐｅｒａｔｕｒｅ ｐ     

The internal nitriding behavior of Co-3Cr,Co-3Al,and Co-3Ti (a/o) over the range of 700–1100°C

Internal nitridation of Co containing 3 a/o of either Cr, Al, or Ti was studied over the range of 700–1100° C in NH₃/H₂ (694 ratio). The kinetics of thickening of the reaction zone followed the parabolic rate law, suggesting that solidstate diffusion was rate controlling. Activation energies obtained were 51.2 Kcal/molfor Co-3Cr, 46.6 Kcal/mol for Co-3Ti, and 27.9 Kcal/mol for Co-3Al. XRD showed only CrN, AlN, and TiN. Deep etching revealed that AlN formed hexagonal plates near the surface when formed at high temperature, the precipitates becoming more massive (blocky morphology) near the reaction front. TiN formed elongated dendritic precipitates, whereas CrN tended to form spheroids. The precipitate size varied with temperature, decreasing with decreasing temperature. In some cases, nitriding formed a case but no visible precipitates even at very high magnifications in the SEM. The solubility of nitrogen in cobalt was determined by long-time equilibration and subsequent chemical analyses. The diffusivity of nitrogen in cobalt was determined from measured permeabilities and the experimentally determined solubilities. Mechanisms are discussed, and the behavior of internal nitridation is compared with internal carburization and oxidation in cobalt alloys.     

面向对象的产品设计知识库的研究

文章立足产品设计知识库的功能需求分析,采用面向对象的方法构建产品设计知识库.首先,阐述了面向对象产品设计知识库的构建原理,也就是对产品设计知识抽象分类得到知识类信息并用专用的数据库进行管理,然后采取相应的程序接口生成知识管理的界面,并通过此界面完成产品设计知识的录入和其他管理工作.最后,文中接着简单介绍了面向对象产品设计知识库具体实现的几个重要方法.     

Grinding-hardening with liquid nitrogen: Mechanisms and technology

This paper studies an innovative development of a steel grinding–hardening technology using an inert cryogen—liquid nitrogen. It was found that phase transformations took place during grinding with the application of liquid nitrogen and resulted in hardened surface layer in a ground component. The layer had a fine laths martensite structure which gave rise to a remarkably high hardness. It was also shown that the treatment can produce superior surface integrity, with compressive surface residual stresses and without surface oxidation. Due to the inert nature of the liquid nitrogen, the grinding process becomes environmentally conscious.     

An Optimization Method For Estimating Phase Compositions And Amounts In Two—Phase Nickel Base Superalloys

根据已知镍基合金成分和γ′相成分，运用分层宽容多目标优化法，分别计算了γ相成分及γ′相含量．优化测算过程的实现是通过建立使杠杆定律等式两端数值差最小和两相共格错配度最小的目标函数，并通过设置γ′相含量和基体相成分取值范围的约束条件而实现的．验证了该方法的可行性和准确性．